اکچویتور پنوماتیک فستو
106,672,000 ﷼
فروشگاه ارسال کننده را انتخاب کنید
تحویل در محل فروشگاه در لاله زار
رایگان
ارسال سریع و امن
تهران و حومه، پیک و یا تاکسی اینترنتی/خارج از تهران، ارسال به ترمینال باربری و یا کارگو
زمان تحویل بسته به نوع سفارش متغیر می باشد.
پیش کرایه
دو سال گارانتی
15 روز بازگشت وجه
اکچویتور روتاری پنوماتیک فستو DAPS-0015-090-R-F04 با کد فنی 533475 و زاویه چرخش 90 درجه می باشد.
مشخصات فنی اکچویتور روتاری پنوماتیک فستو DAPS-0015-090-R-F04 بشرح زیر می باشد.
| Position drive dimensions | 0015 |
| Flange drilling screen | F04 |
| Swivel angle [deg] | 90 |
| Adjustable range end position at 0° [deg] | -1 to 9 |
| Shaft connection Depth [mm] | 13,2 |
| Standard connection to fitting | ISO 5211 |
| Dampening | No dampening |
| installation position | arbitrary |
| Principle of operation | double acting |
| Construction set up | Joch kinematics |
| Position detection | without |
| Closing direction | Right closing |
| Valve connection corresponds to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | Product can be used in SRP/CS up to SIL 2 Low Demand |
| Operating pressure [bar] | 1 to 8.4 |
| Nominal operating pressure [bar] | 5,6 |
| ATEX gas category | II 2G |
| Ex ignition protection type gas | Ex h IIC T6…T3 Gb X |
| ATEX dust category | II 2D |
| Ex ignition protection type dust | Ex h IIIC T85°C…T200°C Db X |
| Ex ambient temperature | -20°C <= Ta <= +60°C |
| ambient temperature [°C] | -20 to 80 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| CE certificate (see declaration of conformity) | to EU EX protection directive (ATEX) |
| Corrosion resistant class KBK | 3 – severe corrosion stress |
| Rotary torque for nominal operating pressure and 0° pivot angle [Nm] | 15,0 |
| Rotary torque for nominal operating pressure and 50° pivot angle [Nm] | 7,5 |
| Rotary torque for nominal operating pressure and 90° pivot angle [Nm] | 11,3 |
| Information about torque | The operating torque of the actuator may not be higher than the maximum permitted torque listed in ISO 5211, related to the size of the fastening flange and the coupling. |
| Air consumption a 6 bar per cycle 0°-90°-0° [LTR] | 0,72 |
| Product weight [g] | 750 |
| Shaft connection | V11 |
| Pneumatic connection | G1/8 |
| Material information | RoHs compliant |
| Cover material | Aluminium wrought alloy |
| Seals material | FKM |
| Housing material | Aluminium wrought alloy |
| Screws material | High-alloyed steel |
| Shaft material | High-alloyed steel |
| Material number shaft | 1.4305 |
| Weight | 750 g / Pcs |
| GTIN | 4052568167264 |
| Customs duty number | 84123900 |
| RoHS compliant | Yes |
| Manufacturer | Festo |
هنوز حساب کاربری ندارید؟
ایجاد حساب کاربری
